|
 |
 |
| |
|
- Impedance8 Ohm
- Input Voltage:12 VDC
- Oper Voltage:6 To 15VDC
- Min SPL:115 dB at 12VDC/1m
- Max Current:1400 mA at 12VDC
- Flash Rate :115 +/-15 Per Minite
- Strobe Len:Acrylic Lens
- Tone Nature:Warble
- Housing:White ABS Plastic
- Remark:4 leds flash in turn when standby
|
|
|
|
|
- With the photo-electric sensing principles, this kind of detectors is activated more quickly, accurately and reliable, and there are no false alarm due to chemicals, exhaust gas, wind and exterior light.
- With stainless steel screen of holes' diameter 0.5mm preventing from flying insects and dust particles but no barrier to smoke inflow.
- The photoelectric type detector ensures repeated use and by removing the cover can accomplished maintenance easily.
- Non-polarity for simple wiring connection.
- A terminal without output voltage (A type connect) in the base plate is available for providing connection to other control system.
|
|
|
|
|
- Microprocessor based conventional fire alarm control panel complies with EN54-2 & 4
- 1 or 2 detection zones
- One set of volt free changeover contacts operable on fire
- Head removal via zener clamp or active end of line unit
- Open collector fault output
- Zone and alarm disablement
|
|
|
|
|
|
|
|
|
